Vertical Ring Die Pellet Machine is a new biomass fuel production
machinery by processing scrap from forest and agricultural waste
like eucalyptus, pine, birch, poplar, fruit and agricultural straw,
bamboo. Compared with the old machine, it absorbed the essence of
horizontal ring die and flat die pellet machine, solved the
insufficient pressure, die crack problems of horizontal ring die
pellet machine, and overcame the small capacity, high failure rate
of flat die pellet machine.
| Model | Power
(kw) | Capacity for
wood pellets(kgs/h) | Weight of the
machine(kgs) | Dimension of the
machine (mm) |
| KL-560 | 90+1.5+0.37+1.5 | 1000-1500 | 6100 | 2600x1300x2300 |
| KL-850 | 220+3+0.37(0.55)+2.2 | 2000-3000 | 14500 | 3300x1400x3100 |
| KL-920 | 315+5.5+0.55+1.5+2.2 | 3000-4000 | 18000 | 3800x1680x3400 |
It adopt the large modulus hardened surface helical gearbox, main
shaft reinforcement, power output is strong, good stability, low
failure rate, low production cost, so it is the first choice
machinery for biomass energy industry.
(1) Big Gear Box
The gearbox adopts independent research and development big 3 level
drive,module increased , gear strengths increased,carrying more and
more ability.The service life increased 8-10 times than the
traditional reducer,greatly increase the service life.
(2) Casting material of gearbox with high stability.
Gearbox body is casted. Its advantages has strong,good heat
dissipation,low heat deformation, high steady etc. Avoid
disadvantages of the bad sealing for welding boby, easily
deformation due to high heat,low steady in basis etc.
(3) Parallel vertical installation reduce energy consumption loss.
The motor and main shaft of wood pellet machine supplier are
parallel vertical installed , which can reduce energy consumption
loss in the process of transmission, more output power, higher
transformation of energy efficiency.
application
Biomass pellets are alternative fuels to non-renewable energy
sources such as coal, petroleum, and natural gas, which can
save energyand reduce carbon emissions. It is an efficient and
clean renewable energy source. They can obtain heat energy
through combustionand are widely used in life heating, power
generation and other fields.
FAQ
1.Q: General questions to design the production line for you?
A:1. What is your raw materials? (to confirm mould pressure ratio
of machines )
2. What is the moisture content of your raw material?
3. How many output capacity do you want per hour / month/ year?
Note: If the moisture is high, you need a dryer, becuase the
suitable moisture content to enter pellet machine is 13-15%. And
please provide us above detailed information, then we would design
the most suitable production line with reasonble offers.
2. Q: How long is your guarantee?
A: 12 months warranty but except quick wearing parts.
3. Q: Will you send engineers to install the machines?
A: Of course. Our company has professional installation engineers
team and specialized after-sale service team. When the machines
arrive your factory, we will send our installation engineers to
your factory Our engineers will Guide you to install the machines
and training your workers how to operate the machines and maintain
the machine.
4. Q: Voltage requirement ?
A: Our machines can use 380V, 220V, 240V, 415V, 480V, and 50Hz,
60Hz.
